How do I go into setting a Dodocool wifi extender?

by

Dodocool Wifi extender setup is the name of a wifi network extender.Does it describe a wifi network extender and explain why we must have one? A wi-fi extender can help us use our electronic devices when the wifi range in the house or place to work is reduced. There are situations when a home router’s coverage is insufficient to provide a reliable and strong internet connection throughout the house.At this reason, tools like the highly useful Dodocool DC39 wall-mounted wireless range extender are good at making things simpler. It can even enter residential areas.. It can function up to a distance of 100 metres and has a 300 Mbps transmission rate via a 2.4 GHz network via wireless N (802.11n). Improved wifi performance and stability are guaranteed by two integrated antennas. There are many methods for setting a Dodocool DC39 extender.

How can I directly set up a Dodocool extender?

  • Turn on your Dodocool extension by putting it into a power outlet.
  • On your Wi-Fi-enabled device (laptop, smartphone, or tablet), go to the Wi-Fi settings.
  • Check out the internet connection that your Dodocool extender is broadcast to; it usually appears in the name “Dodocool_Extender”.
  • Connect to this Wi-Fi network using the provided default password.
  • enter the default IP address for Dodocool extenders ap.setup or 192.168.10.1 and press Enter.
  •  Refer to the user manual for the default credentials, typically “admin” for both.
  • Follow the on-screen instructions to configure your Dodocool extender. This usually involves selecting your existing Wi-Fi network and entering its password.
  • After entering the required information, apply the settings and wait for the extender to restart
  • Join your devices to the larger Wi-Fi network once the extender has reset.

NOTE : If you need any help regarding your wavelink wifi range extender so get in touch with the technician or visit the official web site that is ap setup.

How do I connect Dodocool extender setup” via WPS setup?

  1. The extender must be plugged into an electrical socket.
  2. After the green light blinks and the Dodocool DC39 extender is in the same room as your wireless router, it is ready to go.
  3. Check that the DC39 extender’s switch is in the correct mode (range extender, router, or signal repeater).
  4. During two minutes, hit the WPS button for the extension and your router. 
  5. The WPS button on the dodocool extender is situated on its side.
  6. The WPS light within the extender and the router will both be pulsing. In a similar vein upon setup, the DC39’s Wi-Fi light will turn solid.
  7. You can now connect your devices to the wi-fi-deficient location by moving this extender there.

Login method for Dodocool wifi extender setup ?

  • Connect a Wi-Fi capable device (such a laptop or smartphone) to the Wi-Fi network that your Dodocool extender is broadcasting. Usually, the network name (SSID) is “Dodocool_Extender.”
  • On the connected device, open a web browser.
  • Enter the Dodocool extenders’ default IP address in the browser’s address box. This may be 192.168.0.1 or 192.168.1.1. Hit the Enter key.
  • It will ask for your username and password. For the default password, consult the user manual that came with your Dodocool extender. Usually, a username and password are “admin”.
  • You are able to see your Dodocool extender’s setup settings after signing in.

How do firmware updates in Dodocool wifi setup? 

  1. Setup a network link among your Dodocool extender with a device like a computer or smartphone.
  2. Open a web browser and enter the default IP address of your Dodocool extender in the address bar. The IP addresses 192.168.0.1 or 192.168.1.1 as common settings.
  3. Log in with your administrator credentials. Refer to the user manual for the default username and password.
  4. Find the firmware or system update section by going to the admin page. This may be titled like “System Maintenance,” “Firmware Update,” or something similar.
  5. Within the firmware update section, there should be an option to check for the latest firmware updates. Click on it to see if there’s a newer version available.
  6. If a new firmware version is available, download it from the Dodocool website or the official source recommended in the admin panel.
  7. The downloaded firmware file should be ready to be published or updated via the admin panel’s firmware update section.
  8. Begin the firmware update process by following the on-screen instructions. This may involve confirming your intention to update and waiting for the process to complete.
  9. Once the firmware update is complete, the extender will likely restart automatically. Be patient and allow the device to finish the restart process.

Confirm the firmware version in the admin area after restart to be sure the update is successful.

How do I reset my Dodocool extender?

  • Click a reset button on your WiFi extender Dodocool. Often small and recessed, this button might have to be manually hit using a paperclip or similar tool.
  • Ensure that your Dodocool extender is powered on
  • Use a paperclip or similar tool to press and hold the reset button for about 10-15 seconds. Hold it fixed until the extender’s lights start to flash, indicating it takes a few moments to resetThis can take a minute or two to do this.
  • You may have to battery cycle the extension cord by putting it off and back on after the reset is complete.
  • join the initial WiFi network which your Dodocool extender—typically called “Dodocool_Extender”—broadcasts.
  • Access the extender’s configuration page using a web browser and the default IP address (commonly 192.168.0.1 or 192.168.1.1).
  • Log in with the default username and password (refer to the user manual for these credentials).
  • Follow the setup wizard or configuration steps to set up your Dodocool WiFi extender again.
  • After the reset, it’s advisable to change the default login credentials and WiFi passwords for security reasons.